Game Night Friday, Jan 27th
By dustin on Under game night

Folks, I'm setting up a game night on Friday January 27th, starting at 7PM down at the Hive.
I'm planning on bringing a few lighter games and a few more involved games. I'll have something for 3 players and I believe Ultimate Werewolf can have up to 63 players.
Feel free to bring any other games you might want to play as well when you come down.
- Will B, Lounge Warden
Game Night!
By dustin on Under Hive13, game night

Folks, I'm setting up a game night on Friday September 30th, starting at 7PM down at the Hive.
I'm planning on bringing a game I'm working on that is a board game version of Mario Kart, I'll also bring Ultimate Werewolf, a deception based party game, and a few others.
Feel free to bring any other games you might want to play as well when you come down.
-Will B,
Lounge Warden
Power Tool Drag Racing
By dustin on Under PTDR, Power Tool Drag Racing, 2016, Tool Racing

Heya folks, our Power Tool Drag Racing Season for 2016 is a few months away, so you might as well get a jump start on building a racer! Check out our official PTDR website for more details: http://toolracing.hive13.org/
We hope to see some amazing power tools this season, so lets get to work!
Introduction to the BFR 9000
By dustin on Under Lorin Parker, BFR 9000, CNC, Electronics Warden, Introduction, CAM, Gcode, Mach3, fusion360, Shapeoko

It seems that folks really want to get familiar with our CNC equipment. So Lorin Parker, our electronics warden, will also be offering an introductory course on the same day with Brad to familiarize people with the basics of our CNC. This to help familiarize you with the CNC and demystify things about it, not an certification class. The date and time will be Saturday January 9th from 10am to 12pm. Please RSVP here.
Things that Lorin will cover:
- Safety Safety Safety! Lorin will show you how to not kill yourself or lose a hand
- What the CNC is and is not
- What CAM and GCode do
- What Mach3 is and isn't
- Information about the machines themselves
- We'll use auto desk fusion360 to make some gcode and do some cuts with Shapeoko and the big CNC. Emphasis on best practices and how to get started with CAM.
Introduction to the Enco RF-30 Mill
By dustin on Under enco, mill, Introduction, Brad Walsh, Class

Brad Walsh, our new CNC warden, recently fixed up the mill and offered to run a class on Saturday January 9th from 1 to 3pm. Please RSVP here.
"This would be basic safe operation and a walk through of how to load a tool and make some chips." -Brad
You can check the wiki page for the mill for information regarding the repair process it went through, manuals, and other mill related information.